|
Lining and Relining of
Finishing Barrels and Drums
Extend the life of your Tumbling Barrels with Urethane
Linings
Our "Hot-pour" method of bonding
urethane ensures a seamless permanent bond,
and our
custom compounds will outlast steel for abrasion
resistance by ten-to-one.
|
|
|
 |
Advantages: |
- Abrasion Resistant
- Patchable
- Bonded Directly to Barrel
- Reduction of Noise Levels
- Seamless Construction
- Cushions Delicate Parts
- Resists Contamination from Most Chemicals,
Oils, Metals
|
|
TechMold
is familiar with a wide range of barrels and
drums, and we offer a number of different compounds
to accommodate your individual needs.
 |
This 12 sided barrel is 25
inches deep. It was relined with 1/2" of
urethane and has ribs molded into the bottom. |
|
We bonded urethane ribs onto this high
speed disk for our customer, in order to
improve it's tumbling action.
|
|
|
 |
A 6 foot long horizontal barrel,
four section, hexagonal, relined with 1/2" urethane
(doors were also relined to provide a liquid
tight seal.)
|
|
Service
Because our "turn-around time" for
custom lining or relining of barrels is usually
one week or less, you save on down time. |
|
call
techmold today and start saving on barrel wear
now! You'll be happy you did. |
|
